Results 1 to 8 of 8
  1. Default Calculating Stat vs Att/M.Att (Prime Scrolls)


    Okay, so the obvious answer to this is to just add everything up and compare the two, but is that really all there is to it? I feel like there's a formula or something I should be using to calculate it more accurately. How does secondary stat factor into it as well? Do I need to factor in % Stats/% M.Att?
    1.19 Int:1 M.Att that I got from calculating mine doesn't make any sense to me.

  2. Donator Straight Male
    IGN: ShinkuDragon HoukaPhoenix BoshokuRaven
    Server: Scania
    Level: 152
    Job: Batman
    Guild: IDissOrtis
    panama

    Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    if you go beyond that, constants start to get annoying, there was a thread with a massive formula but i couldn't find it, best i could find was this.

    http://www.southperry.net/showthread.php?t=54311

    edit: if you have an INORDINATE amount of attack compared to int, then that ratio doesn't seem too far off really, i myself am somewhere around 2.5 to 1.

  3. Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    Yes, you'll definitely have to consider your %stats. Not much with %ma as it is multiplicative to both your MA and stat portion of the formula(4P+S).

    Removing multipliers and such:

    (4P+S)*A=R

    4P+S : A is what you need to be taking into consideration, where

    P=Primary stat * (1+Primary%) + Primary stat that doesn't get affected by stat%
    S= ^Replace primary with secondary
    A=M/Attack

    Edit: usually though your secondary stat is negligible, so it's simply P:A

    i.e. Primary Stat : Attack / (1+Primary stat%)

  4. Donator Straight Male
    IGN: ShinkuDragon HoukaPhoenix BoshokuRaven
    Server: Scania
    Level: 152
    Job: Batman
    Guild: IDissOrtis
    panama

    Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    If you ignore secondary stats, you dont use the 4x multiplier nor the potential, since the formula becomes a straight multiplication

  5. Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    Oh.. yes. Brb correcting. (In fact you reminded me something else too)

  6. Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    Alright that's easy enough, thanks guys.

  7. Orbital Bee Cannon
    IGN: SaptaZapta
    Server: Kradia
    Level: 275
    Job: Hero
    Guild: Matriarchy
    Alliance: Peaceful

    Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    Would comparing the effect of an allstat potion (Blessing) to that of an attack potion be a good way to avoid having to add up all sources of att and stats?
    (In other words, do potions enter the formula at the same place as +stat/att on gear?)

  8. Donator Straight Male
    IGN: ShinkuDragon HoukaPhoenix BoshokuRaven
    Server: Scania
    Level: 152
    Job: Batman
    Guild: IDissOrtis
    panama

    Default Re: Calculating Stat vs Att/M.Att (Prime Scrolls)


    Pretty sure they do, i know apples and such did but never bothered checking with stat potions, shouldnt be any different though

  9.  

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •