C:\Windows\system32>smartctl -a /dev/sda
smartctl 6.0 2012-10-10 r3643 [x86_64-w64-mingw32-win8] (sf-6.0-1)
Copyright (C) 2002-12, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: Z1E1Q5EC
LU WWN Device Id: 5 000c50 04ea52f86
Firmware Version: CC24
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Feb 25 21:46:57 2013 PST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/article...S/FAQ/207931en
http://knowledge.seagate.com/article...S/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 89) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off supp
ort.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 222) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always -
306368
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always -
0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always -
27
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always -
0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always -
4717
9 Power_On_Hours 0x0032 100 100 000 Old_age Always -
40
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always -
0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always -
10
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always -
1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always -
0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always -
0
188 Command_Timeout 0x0032 100 100 000 Old_age Always -
0 0 0
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always -
2
190 Airflow_Temperature_Cel 0x0022 077 074 045 Old_age Always -
23 (Min/Max 16/26)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always -
0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always -
5
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always -
97
194 Temperature_Celsius 0x0022 023 040 000 Old_age Always -
23 (0 14 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always -
0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline -
0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always -
0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline -
9h+15m+53.716s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline -
7705163715
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline -
67314
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
C:\Windows\system32>
Bookmarks